Custom stair treads
Custom stair treads, made by hand from your own flooring
We make custom stair treads from your identified flooring, not stock catalog tread covers.
About these parts
Tread Space makes custom stair treads from the flooring supplied for each project, so the steps use the same floor rather than a generic color match. We do not sell carpet, rubber or stock catalog treads.
Made for your stairs
Your stair parts are made by hand in Columbia Falls, Montana, using your approved flooring.
- Made from your approved flooring.
- Custom-fit to your stairs.
Specifications and details
- Handmade in Columbia Falls, Montana. Every nosing, tread and riser is made by hand and custom-fit to your flooring and your stairs. LVP and wood flooring are wrapped in-shop into stair parts made by hand, so the stairs read as part of the floor rather than an added trim. Send your box-label details and stair measurements for a written quote.
Stock stair treads vs custom treads from your floor
Custom treads use your flooring and measurements instead of a coordinating fixed-size catalog cover.
- Not carpet or rubber covers.
- Not a generic color match.
Specifications and details
Stock tread covers
typically carpet, rubber or another fixed-size catalog product in a coordinating color.
Custom treads from your floor
made for the measurements and visible sides you submit, using the flooring identified for your project.
Color and pattern
your actual flooring carries across the stair instead of relying on an approximate catalog match.
How you buy
submit the box-label details, plank dimensions and stair measurements; the written quote confirms suitable parts, timing and freight.
Custom stair parts for different layouts
Choose tread coverage, front-edge nosing or finished returns to suit your stair layout.
- Wall-to-wall treads and risers.
- Floating treads.
- Nosing and open-side returns.
- Retrofit parts.
Specifications and details
Wall-to-wall treads
full step coverage with matching risers for enclosed stairs.
Floating treads
wrapped tread boxes for open-riser and cantilevered stairs, available with 4, 5 or 6 finished sides after project review.
Stair nosing
the finished front edge where flooring covers the tread surface.
Return nosings
finished ends for stairs with one or two open sides.
Retrofit parts
hard-surface options for stairs being changed from carpet.
Built from the flooring selected for your project
LVP, wood and composite options need material review; laminate is offered for stair nosing only.
- LVP and vinyl plank.
- Wood flooring.
- Composite: review required.
- Laminate: nosing only.
Specifications and details
LVP and vinyl plank
stair nosing, treads and risers are reviewed from the exact flooring identification and dimensions.
Wood flooring
stair nosing and tread options are reviewed from the exact wood flooring selected for the project.
Laminate
Tread Space offers laminate stair nosing; other laminate stair parts are not promised and require material review.
Composite flooring
suitable stair parts are confirmed during material review.
What is a bullnose stair tread?
Bullnose means a rounded front edge; the requested appearance needs material and project review.
- Requested appearance confirmed in writing.
Specifications and details
- Bullnose describes a rounded front edge. If you want that appearance, include it with your request; the review and written quote will confirm what the identified flooring and project allow.
What to include for a written quote
Send your flooring label, plank dimensions, stair measurements, open sides and surplus-flooring information.
- Box label and photo.
- Measure front and back widths.
- Note surplus flooring.
Specifications and details
- Flooring brand, collection, color name or SKU from the box label, plus a label photo.
- Plank length, width and thickness.
- Stair count and each stair width, measured at the front and back.
- Which sides are open and which stair-part type you are considering.
- Whether surplus flooring is available and the approximate box count; material handling is confirmed after review.
Installation and nationwide shipping
We supply parts and guidance nationwide; your contractor installs them, with timing and freight quoted.
- Your installer handles installation.
- Production timing and freight by quote.
Specifications and details
- Tread Space supplies the parts and guidance; installation labor is handled by your own contractor or installer. Parts are made in Columbia Falls, Montana and shipped across the United States. Production timing and freight are confirmed in the written quote.
Common questions
What are custom stair treads?
Custom stair treads are made from the flooring material supplied for your project rather than a generic color match.
Which tread types can be made?
Wall-to-wall stair treads and risers, open-side return nosings, and floating stair treads in general 4, 5 or 6-sided configurations. Each layout is reviewed for your project.
How do I request a custom tread quote?
Use the online Match My Floor form or call. Include the flooring brand, product, color name or SKU, plank length, width and thickness, stair count and each stair width, open sides, and project timing.
Do you ship custom treads outside Montana?
Parts are made in Columbia Falls, Montana and shipped to customers across the United States. Freight cost and timing are confirmed per project in the written quote.